BDLTH - MURIACTIC ACID,20 BE'

  • MSDS: BDLTH
  • Manufacturer: ALLIED CHEMICAL CORP
  • Product Name: MURIACTIC ACID,20 BE'
  • National Stock Number: 6810-00-236-5665
Product Identification

Product ID:MURIACTIC ACID,20 BE'
MSDS Date:01/01/1985
FSC:6810
NIIN:00-236-5665
MSDS Number: BDLTH

Responsible Party
ALLIED CHEMICAL CORPORATION.
COLUMBIA RD & PARK AVE
MORRISTOWN, NJ 07960
US

Cage: 1L168

Contractor
ALLIED-SIGNAL INC
1087R MORRISTOWN, NJ 07962-2332 US

Telephone: 201-455-4414

Cage: 1L164

Ingredients

HYDROGEN CHLORIDE (HYDROCHLORIC ACID) (SARA III)

CAS: 7647-01-0

RTECS: MW4025000

Fraction By Weight: 31.5%

OSHA PEL C 5 PPM

ACGIH TLV: C 5 PPM; 9192

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


WATER

CAS: 7732-18-5

RTECS: ZC0110000

Fraction By Weight: 68.5%

Hazards

Effects of Overexposure:SEVERE SKIN BURNS AND WILL IRRITATE OR BURN
EYES AND RESPIRATORY TRACT CAUSING CHOKING.

First Aid

First Aid:IMMEDIATELY FLUSH SKIN OR EYES WITH PLENTY OF WATER FOR AT
LEAST 15 MINUTES.USE SHOWER AND REMOVE CLOTHES IF CONTAMINATED.IF
INHALED,REMOVE FROM CONTAMINATED ATMOSPHERE.GIVE ARTIFICIAL
RESPIRATION.GET DOCTOR.

Fire Fighting

Extinguishing Media:NON FLAMMABLE
Fire Fighting Procedures:USE A GAS MASK, AS HYDROCHLORIC ACID GAS IS
RELEASED BY HEAT
Unusual Fire/Explosion Hazard:REACTION WITH STEEL AND COMMON METALS
PRODUCE EXPLOSIVE HYDROGEN GAS.

Accidental Release

Spill Release Procedures:AVOID BREATHING VAPORS.USE PLASTIC
EQUIPMENT,PAILS FOR ANY ACID REMOVAL.COVER WITH SODIUM CARBONATE OR
AN EQUAL MIXTURE OF SODA ASH AND SLAKED LIME. AFTER MIXING,ADD
WATER IF NECESSARY TO FORM A SLURR Y.

Handling

Handling and Storage Precautions:PROTECT CONTAINER AGAINST PHYSICAL
DAMAGE. STORE IN A COOL DRY AREA,WELL VENTILATED AND AWAY FROM HEAT
AND OXIDIZERS.
Other Precautions:AVOID CONTACT WITH METALS,ETHYLENE AND IGNITION
SOURCES.FUMES WILL RUST METALS.

Exposure Controls

Respiratory Protection:RESPIRATOR APPROVED BY U.S.BUREAU OF MINES.
Ventilation:MECHAN/LOCAL-ADEQUATE TO MAINTAIN EXPOSURE BELOW TLV
Protective Gloves:RUBBER/PLASTIC
Eye Protection:CHEMICAL SAFETY GOGGLE
Other Protective Equipment:RUBBER OR PLASTIC BODY
PROTECTION(APRONS,ETC.) PLASTIC GLOVES
Supplemental Safety and Health

Chemical Properties

HCC:C1
Boiling Pt:B.P. Text:182F,83C
Vapor Pres:24
Spec Gravity:1.16
Evaporation Rate & Reference:< 1 (ETHER)
Solubility in Water:COMPLETE
Appearance and Odor:COLORLESS TO SLIGHTLY YELLOW LIQUID WITH A SHARP
ODOR.
Percent Volatiles by Volume:100%

Stability

Stability Indicator/Materials to Avoid:YES
REACTS WITH MOST METALS AND CHEMICALS,PARTICULARLY ALKALIES.
Stability Condition to Avoid:SLOW RELEASE OF HCL GAS,INCREASING WITH
HEAT.
Hazardous Decomposition Products:HCL GAS FROM HEATING. HYDROGEN GAS
REACTION WITH METALS.

Disposal

Waste Disposal Methods:NEUTRALIZE WITH ALKALI AND FLUSH TO SEWER IF
PERMITTED BY DISPOSAL REGULATIONS.DISPOSAL BY DISPOSAL CONTRACTOR
MAY OTHERWISE BE NEEDED.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.